| 1 | 2 | 3 | Up | |
| Press Key | Digit 1 | Digit 2 | Digit 3 | Mem/VFO Up |
| F/W + Key | CTCSS Type | CTCSS Tone | Transmit Power | VFO Up 1MHz |
| Press & Hold | Toggle Weather | Activates ARTS | Smart Search | Scan Upward |
| 4 | 5 | 6 | Down | |
| Press Key | Digit 4 | Digit 5 | Digit 6 | Mem/VFO Down |
| F/W + Key | CTCSS Shift +/-/Off | CTCSS/DCS Bell | Activates Lockout | VFO Down |
| 7 | 8 | 9 | HM/RV | |
| Press Key | Digit 7 | Digit 8 | Digit 9 | Rev Trans/Receive |
| F/W + Key | Enhanced Paging | Memory Scan "Skip" | DTMF mode (Internet) | "Home" Channel |
| Press & Hold | ||||
| V/M | Int/0 | Band Dn | FW | |
| Press Key | VFO/Memory | Internet/Digit 0 | Band Up/Mem Tune | Activates Secondary Function |
| F/W + Key | Priority Function | Programming Mode | Band Down | Disables Secondary Function |
| Press & Hold | Starts programable scanner | Enables Internet access code | Selects Bandwidth for VFO scan | Activates "Memory Write" |
Program Memory: 1) VFO->Freq. 2) Hold F/W for 5 seconds 3) Pick channel 4) F/W to save
To Label Channel: 1) Pick channel 2) F/W+0 -> 28 3) F/W to see label 4) F/W to clear label 5) Spin dial, F/W to select letter
6) MHz down to backspace 6) Hold F/W 7) Press PTT
Review Memory Frequency (i.e. Tune Memory) In memory mode, press Band. You can adjust, or press Band to exit.
To jump to a memory location, type in the number, then press F/W.
To Label Channel: 1) Pick channel 2) F/W+0 -> 28 3) F/W to see label 4) F/W to clear label 5) Spin dial, F/W to select letter
6) MHz down to backspace 6) Hold F/W 7) Press PTT
Review Memory Frequency (i.e. Tune Memory) In memory mode, press Band. You can adjust, or press Band to exit.
To jump to a memory location, type in the number, then press F/W.